LLDPE 6118LE SABIC SAUDI

Form：Granules | Grade：Thin film grade

Properties:

low densityHigh rigidityhigh strengthSmoothnessanticakingantioxidantHigh impact resistance

Typical Applications:

Blown filmfilmLaminateAgricultural applications

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Blown film \| film \| Laminate \| Agricultural applications
Properties:	low density \| High rigidity \| high strength \| Smoothness \| anticaking \| antioxidant \| High impact resistance

Certificates

No Data...

Technical Data Sheet

optical performance	Test Condition	Test Method	Test Result	Test Unit
gloss	45°,50.0μm,Blown Film	ASTM D2457	57
turbidity	50.0μm,Blown Film	ASTM D1003A	13	%
impact performance	Test Condition	Test Method	Test Result	Test Unit
impact strength	50.0μm，吹膜	ASTM D4272	350	J/cm
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Friction coefficient	Blown Film	ISO 8295	0.10
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Vicat softening temperature		ISO 306/A	106	°C
Melting temperature		Internal Method	124	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	190°C/2.16kg	ISO 1133	0.90	g/10min
film	Test Condition	Test Method	Test Result	Test Unit
tensile strength	TD:Yield,50μm,Blown Film	ISO 527-3	12.5	Mpa
	tensile strength	MD:Break,50μm,Blown Film	ISO 527-3	47.0	Mpa
	tensile strength	tensile strength	TD:Break,50μm,Blown Film	ISO 527-3	40.0	Mpa
elongation	MD:Break,50μm,Blown Film	ISO 527-3	630	%
elongation	elongation	TD:Break,50μm,Blown Film	ISO 527-3	800	%
film thickness			50	µm
Tensile modulus	MD:50μm,Blown Film	ISO 527-3	190	Mpa
Tensile modulus	Tensile modulus	TD:50μm,Blown Film	ISO 527-3	230	Mpa
tensile strength	MD:Yield,50μm,Blown Film	ISO 527-3	11.0	Mpa
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
viscosity	50.0μm，吹膜	Internal Method	10	g
Puncture resistance	50.0μm，吹膜	Internal Method	750	J/m
tear strength	MD:50.0μm	ISO 6383-2	100.0	kN/m
tear strength	tear strength	TD:50.0μm	ISO 6383-2	400.0	kN/m

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top