HDPE AEI SX739:CM488-6
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Resistance to environmental stress cracking | ASTMD1693A | 20.0 hr | |
| ASTMD2765 | 62 % | ||
| density | BS2782620A | 0.954 g/cm³ | |
| melt mass-flow rate | 内部方法 | 4.5 g/10min |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Crosslinking-Inhotwater | 5.0 hr | ||
| 12.0 hr | |||
| 24.0 hr |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus- | BS2782320A | 900 MPa | |
| Tensile stress | IEC60811-1-1 | 26.0 MPa | |
| Tensile strain | Break | IEC60811-1-1 | 450 % |
| abrasion resistance | ISO4649 | 160 mm³ |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO180 | 6.0 kJ/m² | |
| ISO180 | 12 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| thermosetting | IEC60811-2-1 | 60 % | |
| IEC60811-2-1 | 5.0 % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top