TPEE BEXLOY® G3548L
29
- Properties:UV resistanceThermal stability
- Usages:Automotive ApplicationsElectrical applications
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D-1238 | 10 g/10min | |
| Taber wear amount | ASTM D-1044 | 310 mg/1000rev | |
| ASTM D-1044 | 30 mg/1000rev |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| 24-hour water absorption rate | ASTM D-570 | 5 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ELONGATION AT BREAK | ASTM D-638 | 200 % | |
| durometer hardness | ASTM D-2240 | 35 | |
| Fracture tensile force | ASTM D-638 | 10.3 Mpa | |
| Initial tear resistance performance | ASTM D-1004 | 51 kN/m | |
| Rubbing modulus | ASTM D-790 | 32.4 Mpa | |
| Tensile | ASTM D-638 | 1.7 Mpa | |
| ASTM D-638 | 2.6 Mpa | ||
| Ezo impact strength | ASTM D-256 | 不破裂 J/m |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Wear resistant and flexible incision growth performance | ASTM D-1052 | >1×10 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ASTM D-1525 | 77 °C | |
| melting point | ASTM D-3418 | 156 °C | |
| heat distortion temperature | ASTM D-648 | N/A °C | |
| ASTM D-648 | N/A °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top