HMW-HDPE TOTAL Polyethylene HDPE 50100.1
0
- Properties:physical property
CompareTechnical Data Sheet
| Test Condition | Test Method | Test Result | |
|---|---|---|---|
| Environmental stress cracking resistance | ASTM D1693B | 120 hr | |
| ASTM D1693B | >600 hr | ||
| tensile strength | Yield | ASTM D638 | 26.2 MPa |
| elongation | Break | ASTM D638 | 600 % |
| Flexural modulus | ASTM D790 | 1210 MPa | |
| density | ASTM D792 | 0.948 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 12 g/10min | |
| UL flame retardant rating | UL 94 | HB | |
| Blow molding temperature | 188to232 °C | ||
| melting temperature | ASTM D3417 | 127 °C | |
| Impact strength of cantilever beam gap | ASTM D256A | 530 J/m |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top