LDPE Lotrène® FD0274
44
- Properties:high strengthtransparent
- Usages:membraneFood packagingfilmLaminateFood packaging
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTMD1505 | 0.923 g/cm³ | |
| melt mass-flow rate | ASTMD1238 | 2.4 g/10min |
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| gloss | ASTMD2457 | 75 | |
| transparency | ASTMD1746 | 85.0 | |
| Haze ratio | ASTMD1003 | 6.5 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD1894 | 0.10 |
| film | Test Condition | Test Method | Test Result |
|---|---|---|---|
| elongation | ASTMD882 | 570 % | |
| Falling hammer impact 2 | ASTMD1709B | 110 g | |
| Film thickness - tested | 50 µm | ||
| Available film thickness | 25to100µm | ||
| tensile strength | ASTMD882 | 14.0 Mpa | |
| ASTMD882 | 11.0 Mpa | ||
| ASTMD882 | 22.0 Mpa | ||
| ASTMD882 | 21.0 Mpa | ||
| elongation | ASTMD882 | 470 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ASTMD1525 | 94.0 °C | |
| Crystallization peak temperature | ASTME794 | 111 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top