Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Specific volume | | ASTM D792 | 0.856 cm³/g |
| Shrinkage rate | | 内部方法 | 1.0-1.2 % |
| Water absorption rate | | ASTM D570 | 0.13 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| elongation | | ASTM D638 | 170 % |
| Flexural modulus | | ASTM D790 | 1720 Mpa |
| bending strength | | ASTM D790 | 68.9 Mpa |
| tensile strength | | ASTM D638 | 49.6 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Dart impact | | ASTM D3763 | 55.9 J |
| Dart impact | | ASTM D3763 | 48.0 J |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTM D257 | 9.5E+16 ohms·cm |
| dielectric strength | | ASTM D149 | 29 KV/mm |
| dielectric strength | | ASTM D149 | 20 KV/mm |
| dielectric constant | | ASTM D150 | 2.93 |
| dielectric constant | | ASTM D150 | 2.95 |
| Dissipation Factor | | ASTM D150 | 2E-03 |
| Dissipation Factor | | ASTM D150 | 0.030 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648 | 116 °C |
| Heat distortion temperature | | ASTM D648 | 96.1 °C |
| RTI Elec | | UL 746 | 75.0 °C |
| RTI Imp | | UL 746 | 75.0 °C |
| RTI Str | | UL 746 | 75.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices