Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO 1183 | 1.47 g/cm³ |
| melt mass-flow rate | | ISO 1133 | 33.90 cm³/10min |
| hardness | Test Condition | Test Method | Test Result |
|---|
| ball-indentation hardness | | ISO 2039-1 | 140 MPa |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ISO 527-2 | 125 MPa |
| elongation at break | | ISO 527-2 | 2.1 % |
| Tensile modulus | | ISO 527-2 | 9900 MPa |
| Flame retardant performance | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL -94 | 1.60mm |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric constant | | IEC 60250 | 3.70 1MHz |
| Dissipation Factor | | IEC 60250 | 3E-03 100Hz |
| Dissipation Factor | | IEC 60250 | 0.018 1MHz |
| Dissipation Factor | | IEC 60112 | 325 V |
| dielectric constant | | IEC 60250 | 3.80 100Hz |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ISO 75-2/Bf | 215 °C |
| Heat distortion temperature | | ISO 75-2/Af | 190 °C |
| vicat | Melting Temperature | ISO 11357-3 | 223 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare