Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792A | 2.40 g/cm³ |
| Water absorption rate | | ASTM D570 | 0.070 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | V-0 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Breakdown voltage strength | | ASTM D149 | >45000 V |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTM D638 | 4870 MPa |
| Tensile modulus | | ASTM D638 | 3560 MPa |
| Flexural modulus | | ASTM D790 | 3720 MPa |
| Compression Modulus | | ASTM D695 | 2520 MPa |
| film | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTM D882 | 144 MPa |
| tensile strength | | ASTM D882 | 119 MPa |
| peelstrength | | 内部方法 | -2.5 kN/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric constant | | 内部方法 | 3.50 |
| Dissipation Factor | | 内部方法 | 3E-03 |
| arc resistance | | ASTM D495 | >180 sec |
| Surface Resistivity | | 内部方法 | 4.5E+07 ohms |
| Volume resistivity | | 内部方法 | 1.2E+15 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| thermal conductivity | | ASTMC177 | 0.24 W/m/K |
| Linear coefficient of thermal expansion | | 内部方法 | 1.2E-05 cm/cm/°C |
| Linear coefficient of thermal expansion | | 内部方法 | 1.5E-05 cm/cm/°C |
| Linear coefficient of thermal expansion | | | 9.5E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare