Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.08 g/cm³ |
| melt mass-flow rate | | ASTMD1238 | 25 g/10min |
| Shrinkage rate | | ASTMD955 | 0.30到0.70 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | R-Scale | ASTMD785 | 125 |
| optical performance | Test Condition | Test Method | Test Result |
|---|
| transmissivity | | ASTMD1003 | 93.9 % |
| Haze ratio | | ASTMD1003 | 0.40 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | HB |
| Limiting Oxygen Index | | ASTMD2863 | 20 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTMD638 | 3590 MPa |
| tensile strength | Yield | ASTMD638 | 55.6 MPa |
| tensile strength | Break | ASTMD638 | 55.6 MPa |
| elongation | Break | ASTMD638 | 1.7 % |
| Flexural modulus | | ASTMD790 | 4270 MPa |
| bending strength | Yield | ASTMD790 | 99.3 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 16 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | 101 °C |
| | ASTMD696 | 6.3E-05 cm/cm/°C |
| vicat | | ASTMD1525 | 113 °C |
| | ASTMD648 | 101 °C |
| | ASTMD648 | 103 °C |
| | ASTMD648 | 87.2 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare