PP PC-SB
0
CompareTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | 0.15 % | ||
| density | 1.20 g/cm3 | ||
| melt mass-flow rate | 4-5 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| elongation | Break | 100 % | |
| Suspended wall beam without notch impact strength | NB kj/m2 | ||
| bending strength | 95 MPa | ||
| Impact strength of cantilever beam gap | 70 kj/m2 | ||
| tensile strength | 60 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | 130 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top