Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | | 1.42到1.46 g/cm³ |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shore A | | 80到84 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| LossofMass- | | EN50363-3 | 0.800 mg/cm² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile stress | Yield | EN50363-3 | 15.2 MPa |
| Tensile stress | | EN50363-3 | 15.5 MPa |
| Tensile strain | Break | EN50363-3 | 280 % |
| Tensile strain | | EN50363-3 | 260 % |
| aging | Test Condition | Test Method | Test Result |
|---|
| Change rate of tensile strength in air | | EN50363-3 | 2.0 % |
| Change rate of ultimate elongation in air | | EN50363-3 | 7.1 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| insulation resistance | | EN50363-3 | 0.500 Mohms/km |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Continuous use temperature | | | 70.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare