PBT 9K24300 FR1 4Plas

Properties:

Characteristics high impact resistance

Product Description

Certificates(0)

Datasheet

Product Description

Properties:

Characteristics | high impact resistance

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	-30°C	ISO 180/1A	4.0	kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23°C	ISO 180/1A	10	kJ/m²
Suspended wall beam without notch impact strength	23°C	ISO 180/1U	无断裂
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.6mm	UL 94	V-0
Burning wire flammability index	2.0mm	IEC 60695-2-12	960	°C
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus	23°C	ISO 527-2/5	3000	MPa
tensile strength	Break, 23°C	ISO 527-2/5	55	MPa
Tensile strain	Break, 23°C	ISO 527-2/5	30	%
Impact strength of cantilever beam gap	-30°C	ISO 180/1A	4.0	kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23°C	ISO 180/1A	10.0	kJ/m²
Suspended wall beam without notch impact strength	23°C	ISO 180/1U	无断裂
Tensile modulus	23°C	ISO 527-2/5	3000	MPa
tensile strength	Break,23°C	ISO 527-2/5	55.0	MPa
Tensile strain	Break,23°C	ISO 527-2/5	30	%
Heat distortion temperature	Test Condition	Test Method	Test Result	Test Unit
Electrical Properties	漏电起痕指数	IEC 60112	225	V
Hot deformation temperature	可燃性，UL 阻燃等级	UL 94	V-0	1.60 mm
Hot deformation temperature	Hot deformation temperature	灼热丝易燃指数，2.00 mm	IEC 60695-2-12	960	°C
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45 MPa, Unannealed	ISO 75-2/B	165	°C
Hot deformation temperature	Hot deformation temperature	维卡软化温度	ISO 306/B	175	°C
Melting temperature		ISO 11357	225	°C
Hot deformation temperature	Melting Temperature	ISO 11357	225	°C
Hot deformation temperature	Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	165	°C
Vicat softening temperature		ISO 306/B	175	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	1.42	g/cm³
Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.20	%
density		ISO 1183	1.42	g/cm³
Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	0.20	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Compared to the anti leakage trace index		IEC 60112	PLC 3

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top