PP CUN448 SSL SOUTH AFRICA

Form：Granules

Properties:

Electrostatic functionGood impact resistanceGood stiffnessLow temperature toughnessModerate flow

Typical Applications:

Electrical componentsCar exterior decorationAutomotive Interior Packaging box

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Electrical components \| Car exterior decoration \| Automotive Interior \| Packaging box
Properties:	Electrostatic function \| Good impact resistance \| Good stiffness \| Low temperature toughness \| Moderate flow

Certificates

No Data...

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	0.905	g/cm³
melt mass-flow rate	230°C/2.16 kg	ISO 1133	4.5	g/10min
Shrinkage rate	Across Flow	ISO 294-4	1.4	%
Shrinkage rate	Shrinkage rate	Flow	ISO 294-4	1.5	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ISO 527-2/1	1300	Mpa
tensile strength		ISO 527-2/50	27	Mpa
Tensile strain	Break	ISO 527-2/50	50	%
Tensile strain	Tensile strain	Yield	ISO 527-2/50	6	%
Impact strength of simply supported beam without notch	-20℃	ISO 179/1eA	3.5
	Impact strength of simply supported beam without notch	23℃	ISO 179/1eA	15
	Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	0℃	ISO 179/1eA	5.5
Shore hardness		ISO 2039-1	50
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Vicat softening temperature		ISO 306/A50	150	°C
Vicat softening temperature	Vicat softening temperature		ISO 306/B50	63	°C
Melting temperature		ISO 11357-3	163	°C
Hot deformation temperature	0.45Mpa, Unannealed	ISO 75-2/B	83	°C
Hot deformation temperature	Hot deformation temperature	1.8Mpa, Unannealed	ISO 75-2/A	52	°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top