Biodeg Polymers silk

Compare

Technical Data Sheet

physical property	Test Method	Test Result
Water absorption rate	ISO 62	0.50 %
density	ISO 1183	1.25 g/cm³
Melt volume flow rate	ISO 1133	3.00 cm³/10min

hardness	Test Condition	Test Method	Test Result
Shore hardness		DIN 53505	75
ball-indentation hardness		ISO 2039-1	105 MPa

Impact resistance	Test Method	Test Result
Impact strength of simply supported beam without notch	ISO 179/1eU	58 kJ/m²
Charpy Notched Impact Strength	ISO 179/1eA	6.8 kJ/m²
Impact strength of simply supported beam without notch	ISO 179/1eU	37 kJ/m²

Mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ISO 527-2	2700 MPa
tensile strength	Break	ISO 527-2	22.8 MPa
tensile strength	tensile strength		ISO 527-2	51.0 MPa
Tensile strain	Yield	ISO 527-2	2.5 %
Tensile strain	Tensile strain	Break	ISO 527-2	12 %
Flexural modulus		ISO 178	1810 MPa
bending strength		ISO 178	70.0 MPa

Thermal performance	Test Method	Test Result
Heat distortion temperature	ISO 75-2/A	50.4 °C
vicat	ISO 306/A50	58.4 °C
melting temperature	ISO 3146	153 °C
thermal conductivity	DIN 52612	0.17 W/m/K

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top