TPE Alloy Softflex® 3910

0
  • Usages:
    Wrapping molding

Technical Data Sheet

physical property Test ConditionTest MethodTest Result
densityASTM D7921.05 g/cm³
melt mass-flow rateASTM D12382.6 g/10min
melt mass-flow rateASTM D12380.90 g/10min
Shrinkage rateASTM D9551.9 %
Shrinkage rateASTM D9551.7 %
hardnessTest ConditionTest MethodTest Result
Shore hardnessASTM D224090
Shore hardnessASTM D224088
Supplementary InformationTest ConditionTest MethodTest Result
OvermoldBondingABS.PC.ABS/PC.PPO
Mechanical propertiesTest ConditionTest MethodTest Result
Taber abraserASTM D33890.248 mg
Impact resistanceTest ConditionTest MethodTest Result
GardnerImpactASTM D542014.3 J
elastomerTest ConditionTest MethodTest Result
Stretch permanent deformationASTM D41214 %
tensile strength ASTM D4127.08 MPa
tensile strength ASTM D4128.03 MPa
tear strengthASTM D62453.4 kN/m
compression setASTM D39547 %
compression setASTM D39594 %
compression setASTM D39596 %
tensile strength ASTM D41210.3 MPa
tensile strength YieldASTM D41210.4 MPa
elongationBreakASTM D412330 %
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Contact Us

Get App

Top