Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO1183 | 1.38 g/cm³ |
| Shrinkage rate | | ISO294-4 | 0.80 % |
| Shrinkage rate | | ISO294-4 | 0.60 % |
| Water absorption rate | | ISO62 | 6.2 % |
| Water absorption rate | | ISO62 | 1.8 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| Burning wire flammability index | | IEC60695-2-12 | 960 °C |
| Hot filament ignition temperature | | IEC60695-2-13 | 725 °C |
| Burning wire flammability index | | IEC60695-2-12 | 960 °C |
| UL flame retardant rating | | IEC60695-11-10,-20 | V-2 |
| UL flame retardant rating | | IEC60695-11-10,-20 | V-2 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO527-2 | 6200 MPa |
| Tensile stress | Break | ISO527-2 | 65.0 MPa |
| Tensile strain | Break | ISO527-2 | 2.0 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Charpy Notched Impact Strength | | ISO179/1eA | 2.0 kJ/m² |
| Charpy Notched Impact Strength | | ISO179/1eA | 2.0 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO179/1eU | 25 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO179/1eU | 25 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | IEC60093 | -- ohms |
| Volume resistivity | | IEC60093 | >1.0E+15 ohms·cm |
| CTI | | IEC60112 | -- V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO75-2/B | 205 °C |
| | ISO75-2/A | 110 °C |
| melting temperature | | ISO11357-3 | 220 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare