Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 1.80 g/cm³ |
| Apparent density | | ASTM D1895 | 0.30 g/cm³ |
| Shrinkage rate | | ASTM D955 | <0.10 % |
| Water absorption rate | | ASTM D570 | 0.050 % |
| Water absorption rate | | ASTM D570 | 0.20 % |
| Shrinkage rate | | ASTM D955 | <0.10 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTM D785 | 105 |
| Rockwell hardness | M-Scale | ASTM D785 | 120 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTM D638 | 120 MPa |
| Flexural modulus | | ASTM D790 | 22000 MPa |
| compressive strength | | ASTM D695 | 320 MPa |
| bending strength | | ASTM D790 | 260 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTM D256A | 900 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric strength | | ASTM D149 | 12 kV/mm |
| dielectric strength | | ASTM D149 | 10 kV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648A | >282 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare