EMAA Nucrel® NUC0903 DUPONT JAPAN
709
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Disassembly rate | 25℃,3.2mm | ASTM D-542 | 1585 | ND |
| Light transmittance | 1.2mm厚 | ASTM D-1003 | 90 | % |
| Melt mass flow rate | 300℃×1.2kgf | ASTM D-1238 | 65～70 | g/10min |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| elongation | 23 ℃ | ASTM D-638 | 90 | % |
| Bending modulus | 23 ℃ | ASTM D-790 | 24000 | kg/cm2 |
| tensile strength | 23℃ | ASTM D-638 | 650 | kg/cm2 |
| Lzod impact strength | 缺口3.2mm厚 | ASTM D-256 | 54 | kg-cm/cm |
| bending strength | 23 ℃ | ASTM D-790 | 950 | kg/cm2 |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Insulation breakdown voltage | 1.6mm厚 | ASTM D-149 | 30 | KV/mm |
| Forming shrinkage rate | ASTM D-955 | 0.5～0.7 | % | |
| Volume intrinsic impedance | ASTM D-257 | ＞10 | Ω.cm | |
| Linear coefficient of thermal expansion | ASTM D-696 | 6.3×10 | cm/cm/℃ | |
| Hot deformation temperature | 18.6kg/cm | ASTM D-648 | 127 | ℃ |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Arc resistance | ASTM D-495 | 120 | Sec. |
| Other performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Abai number | ASTM D-542 | 30 | Vd |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top