SMMA KMI KM TEC 132 KMI Group, Inc.
0
- Properties:physical property
CompareTechnical Data Sheet
| Test Condition | Test Method | Test Result | |
|---|---|---|---|
| density | ASTM D792 | 1.06 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 5.0 g/10min | |
| elongation | Yield | ASTM D638 | 2.0 % |
| Break | ASTM D638 | 9.0 % | |
| Impact strength of cantilever beam gap | ASTM D256 | 180 J/m | |
| Heat distortion temperature | ASTM D648 | 75.0 °C | |
| vicat | ASTM D1525 | 102 °C | |
| transmissivity | ASTM D1003 | 90.0 % | |
| Haze ratio | ASTM D1003 | 1.4 % | |
| Tensile modulus | ASTM D638 | 2520 MPa | |
| tensile strength | Yield | ASTM D638 | 39.3 MPa |
| Break | ASTM D638 | 49.0 MPa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top