Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 1.40 g/cm³ |
| Shrinkage rate | | ASTM D955 | 1.4to2.0 % |
| Water absorption rate | | ASTM D570 | 0.10 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | V-0 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Charpy Notched Impact Strength | | ISO 179 | 3.0 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO 179 | 25 kJ/m² |
| Suspended wall beam without notch impact strength | | ASTM D256 | 28 J/m |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTM D638 | 45.0 MPa |
| Flexural modulus | | ASTM D790 | 2500 MPa |
| bending strength | | ASTM D790 | 80.0 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTM D257 | 1E+16 ohms·cm |
| dielectric constant | | ASTM D150 | 3.00 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648 | 80.0 °C |
| Linear coefficient of thermal expansion | | ASTM D696 | 7E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare