XLPE Polylink Power Cable PP 409/401 (S)
0
- Properties:Thermal performance
CompareTechnical Data Sheet
| Test Condition | Test Method | Test Result | |
|---|---|---|---|
| thermosetting | IEC60811 | 5.0 % | |
| Volume resistivity | IEC60502 | 1.4E+17 ohms·cm | |
| dielectric strength | IEC60243-1 | 25 kV/mm | |
| dielectric constant | IEC60250 | 2.20 | |
| Power factor | IEC250 | 4E-04 | |
| density | ASTMD1505 | 0.925 g/cm³ | |
| melt mass-flow rate | ASTMD1238 | 0.75 g/10min | |
| Tensile stress | Break | IEC60811 | 14.5 MPa |
| Tensile strain | Break | IEC60811 | 400 % |
| Change rate of tensile strength in air | IEC60811 | 15 % | |
| Changes in tensile stress during fracture in air | IEC60811 | 10 % | |
| thermosetting | IEC60811 | 100 % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top