POM K100 KOLON KOREA

Form：Granules | Grade：Injection grade

Typical Applications:

sheetBar stockThick wall accessories (components)Pipeline systemPipe fittings

Supplier(1)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:

sheet | Bar stock | Thick wall accessories (components) | Pipeline system | Pipe fittings

Certificates

Technical Data Sheet

flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	0.8mm	UL 94	HB
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
bending strength	23°C	ISO 178	80.0	Mpa
bending strength	bending strength	23°C	ASTM D790	80.0	Mpa
Bending modulus	23°C	ISO 178	2450	Mpa
Bending modulus	Bending modulus	23°C	ASTM D790	2200	Mpa
Tensile strain	Break,23°C	ISO 527-2	44	%
elongation	Yield,23°C	ASTM D638	80	%
tensile strength	Yield,23°C	ISO 527-2	60.0	Mpa
tensile strength	tensile strength	Yield,23°C	ASTM D638	57.0	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Vicat softening temperature		ASTM D1525	162	°C
Melting temperature		ISO 11357-3	165	°C
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	95.0	°C
	Hot deformation temperature	1.8MPa,Unannealed	ASTM D648	110	°C
	Hot deformation temperature	Hot deformation temperature	0.45MPa,Unannealed	ASTM D648	158	°C
Melting temperature			166	°C
Linear coefficient of thermal expansion	MD	ASTM D696	1.3E-04	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	190°C/2.16kg	ASTM D1238	2.5	g/10min
Water absorption rate	Equilibrium,23°C,60%RH	ASTM D570	0.22	%
Water absorption rate	Water absorption rate	23°C,24hr	ISO 62	0.60	%
Shrinkage rate	MD	ISO 294-4	2.5	%
	Shrinkage rate	TD	ISO 294-4	2.0	%
	Shrinkage rate	Shrinkage rate	MD	ASTM D955	2.2	%
melt mass-flow rate	190°C/2.16kg	ISO 1133	3.0	g/10min
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dissipation factor	1MHz	ASTM D150	6E-03
Dielectric constant		ASTM D150	3.70
Dielectric strength		IEC 60243-1	19	KV/mm
Surface resistivity		ASTM D257	1E+16	ohms
Surface resistivity	Surface resistivity		IEC 60093	1E+16	ohms
Volume resistivity		ASTM D257	1E+14	ohms·cm
Volume resistivity	Volume resistivity		IEC 60093	1E+14	ohms·cm
Dielectric strength		ASTM D149	19	KV/mm
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	M-Scale	ISO 2039-2	87
Rockwell hardness	Rockwell hardness	M-Scale	ASTM D785	78

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top