PPS HGR3002
30
- Properties:high strengthHigh temperature resistan
- Usages:Electronic appliances
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | Internal Method | 0.25 % | |
| Internal Method | 0.25 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Internal Method | 0.40 | ||
| Abrasion | Internal Method | 6 mm | |
| Wear amount | Internal Method | 6.0 mg | |
| Impact strength of cantilever beam gap | Internal Method | 13 kJ/m² | |
| tensile strength | Internal Method | 136 Mpa | |
| Flexural modulus | Internal Method | 10000 Mpa | |
| bending strength | Internal Method | 200 Mpa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | Internal Method | 272 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top