PP Homopolymer Fiberfil® J-60/30/E8/M
0
- Properties:Fillerglass fiber reinforced material30%filler by weight
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ASTMD955 | 0.30 % | |
| ASTMD955 | 0.40 % | ||
| Water absorption rate | ASTMD570 | 0.030 % | |
| density | ASTMD792 | 1.12 g/cm³ | |
| melt mass-flow rate | ASTMD1238 | 6.0 g/10min |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | R-Scale | ASTMD785 | 105 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTMD638 | 5860 MPa | |
| tensile strength | ASTMD638 | 82.7 MPa | |
| elongation | ASTMD638 | 3.0 % | |
| Flexural modulus | ASTMD790 | 4830 MPa | |
| bending strength | ASTMD790 | 107 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTMD256 | 80 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD648 | 157 °C | ||
| ASTMD648 | 152 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top