Technical Data Sheet
| 物理性能 | Test Condition | Test Method | Test Result |
|---|
| 密度 | | ASTMD792 | 1.27 g/cm³ |
| 熔体质量流动速率 | 337°C/6.6kg | ASTMD1238 | 9.0 g/10min |
| 收缩率 | MD：3.20mm | 内部方法 | 0.50to0.70 % |
| 吸水率 | 24hr | ASTMD570 | 0.25 % |
| 吸水率 | 平衡,23°C | ASTMD570 | 1.3 % |
| 热性能 | Test Condition | Test Method | Test Result |
|---|
| 线性热膨胀系数 | TD：-20to150°C | ASTME831 | 5.4E-05 cm/cm/°C |
| 导热系数 | | ASTMC177 | 0.22 W/m/K |
| RTI Elec | | UL746 | 170 °C |
| RTI Imp | | UL746 | 170 °C |
| RTI Str | | UL746 | 170 °C |
| 热变形温度 | 0.45MPa,未退火,6.40mm | ASTMD648 | 210 °C |
| 热变形温度 | 1.8MPa,未退火,6.40mm | ASTMD648 | 201 °C |
| 维卡软化温度 | | ASTMD15255 | 219 °C |
| 线性热膨胀系数 | MD：-20to150°C | ASTME831 | 5.6E-05 cm/cm/°C |
| 可燃性 | Test Condition | Test Method | Test Result |
|---|
| NBSSmokeDensity-Flaming,Ds,4min | | ASTME662 | 0.700 |
| UL阻燃等级 | 0.40mm | UL94 | V-2 |
| UL阻燃等级 | 0.75mm | UL94 | V-0 |
| UL阻燃等级 | 3.0mm | UL94 | 5VA |
| 极限氧指数 | | ASTMD2863 | 47 % |
| 电气性能 | Test Condition | Test Method | Test Result |
|---|
| 体积电阻率 | | ASTMD257 | 1E+17 ohms·cm |
| 介电强度 | 1.60mm,inAir | ASTMD149 | 33 KV/mm |
| 介电强度 | 1.60mm,在油中 | ASTMD149 | 28 KV/mm |
| 介电常数 | 1kHz | ASTMD150 | 3.15 |
| 耗散因数 | 1kHz | ASTMD150 | 1.3E-03 |
| 耗散因数 | 2.45GHz | ASTMD150 | 2.5E-03 |
| 耐电弧性6 | | ASTMD495 | PLC 5 |
| 相比耐漏电起痕指数(CTI) | CTI | UL746 | PLC 4 |
| 高电弧燃烧指数(HAI) | HAI | UL746 | PLC 3 |
| 高电压电弧起痕速率(HVTR) | HVTR | UL746 | PLC 2 |
| 热丝引燃(HWI) | HWI | UL746 | PLC 1 |
| 机械性能 | Test Condition | Test Method | Test Result |
|---|
| 拉伸模量 | | ASTMD638 | 3590 Mpa |
| 抗张强度 | 屈服 | ASTMD638 | 110 Mpa |
| 伸长率 | 屈服 | ASTMD638 | 7.0 % |
| 伸长率 | 断裂 | ASTMD638 | 60 % |
| 弯曲模量 | 100mmSpan | ASTMD790 | 3520 Mpa |
| FlexuralStrength4 | Yield,100mmSpan | ASTMD790 | 165 Mpa |
| 泊松比 | | ASTMD638 | 0.36 |
| 泰伯耐磨性 | 1000Cycles,1000g,CS-17转轮 | ASTMD1044 | 10.0 mg |
| 硬度 | Test Condition | Test Method | Test Result |
|---|
| 洛氏硬度 | M级 | ASTMD785 | 109 |
| 冲击性能 | Test Condition | Test Method | Test Result |
|---|
| 悬壁梁缺口冲击强度 | 23°C | ASTMD256 | 53 J/m |
| 悬壁梁缺口冲击强度 | 23°C | ASTMD4812 | 1300 J/m |
| ReverseNotchIzodImpact | 3.20mm | ASTMD256 | 1300 J/m |
| 落锤冲击 | 23°C | ASTMD3029 | 36.6 J |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices