PA46 LDS85 BK DSM HOLAND

Form：Granules

Properties:

Glass fiber reinforcedThermal stability

Typical Applications:

Home appliance componentsElectronic and electrical components

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Home appliance components \| Electronic and electrical components
Properties:	Glass fiber reinforced \| Thermal stability

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	27	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
Flammability level		UL 94	HB
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ISO 527-2	10000	Mpa
tensile strength	Break	ISO 527-2	125	Mpa
Tensile strain	Break	ISO 527-2	2.2	%
Bending modulus		ISO 178	8400	Mpa
bending strength		ISO 178	190	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45 MPa, Unannealed	ISO 75-2/B	315	°C
Hot deformation temperature	Hot deformation temperature	1.8 MPa, Unannealed	ISO 75-2/A	285	°C
Glass transition temperature		ISO 11357-2	125	°C
Melting temperature		ISO 11357-3	325	°C
Linear coefficient of thermal expansion	Flow	ISO 11359-2	1.8E-5	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Across Flow	ISO 11359-2	6.0E-5	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Spiral flow length			9.00	CM
Shrinkage rate	横向Flow	ISO 294-4	1.3	%
Shrinkage rate	Shrinkage rate	Flow	ISO 294-4	0.33	%
Water absorption rate	24 hr, 23°C	ISO 62	0.28	%
Water absorption rate	Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	1.5	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Relative permittivity	5.00 GHz	IEC 60250	3.73
Dissipation factor	5.00 GHz	IEC 60250	0.014

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top