TPEE GM4001 SHANGHAI Eton
14
- Properties:Excellent oil resistanceGood comprehensive mechanHigh modulusHigh resilienceExcellent resistance to dGood processing performanFaster molding speed
- Usages:automobilerailwayfibreInjection moldingSpinning
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| hardness | ISO 868 | 40 D | |
| density | ISO 1183 | 1.13 g/cm³ | |
| Shrinkage rate | ISO 2944 | 0.8 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ISO 37 | 24 Mpa | |
| elongation at break | ISO 37 | 600 % | |
| tear strength | ISO 34 | 100 kN/m | |
| Flexural modulus | ISO 178 | 68 Mpa | |
| Impact of simply supported beam gap | ISO 179 | NB kJ/㎡ | |
| Oil resistant expansion rate | GB/T1690 | 1.7 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melting point | ISO 11357 | 178 ℃ | |
| vicat softening point | ISO 306 | 128 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top