
PA66 HTNFR52G20LX BK337 DUPONT JAPAN
100
Form:Granules | Grade:Weather resistant grade
Properties:
Flame retardantHigh temperature resistanFiller: Glass fiber reinf20%Filler by weight
Typical Applications:
Electronic and electrical components
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Electronic and electrical components |
| Properties: | Flame retardant | High temperature resistan | Filler: Glass fiber reinf | 20% | Filler by weight |
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | kJ/m² | 40 | |
| -30°C | kJ/m² | 40 | ||
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| Extreme Oxygen Index | % | 35 | -- | |
| Hot filament ignition temperature | 0.400mm | °C | 725 | -- |
| Burning wire flammability index | 0.400mm | °C | 960 | -- |
| Flammability level | 1.50mm | V-0 | -- | |
| 0.750mm | V-0 | -- | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| bending strength | MPa | 215 | 180 | |
| Bending modulus | MPa | 7800 | 8200 | |
| Tensile strain | Break | % | 2.4 | 2.2 |
| tensile strength | Break | 135 | MPa | |
| Tensile modulus | 8200 | MPa | ||
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 1.8MPa,Unannealed | °C | 276 | -- |
| Linear coefficient of thermal expansion | TD:55to160°C | cm/cm/°C | 1E-04 | -- |
| TD:-40to23°C | cm/cm/°C | 6.4E-05 | -- | |
| TD | cm/cm/°C | 6.8E-05 | -- | |
| MD:55to160°C | cm/cm/°C | 2.1E-05 | -- | |
| MD:-40to23°C | cm/cm/°C | 2.7E-05 | -- | |
| MD | cm/cm/°C | 2.5E-05 | -- | |
| Melting temperature | °C | 310 | -- | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | MD | % | 0.30 | -- |
| TD | % | 1.1 | -- | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Compared to the anti leakage trace index | V | PLC 0 | ||
| Dielectric strength | kV/mm | 42 | -- | |
| Volume resistivity | ohms·cm | >1.0E+15 | -- |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.