ABS GH-8
0
- Properties:Good chemical resistancedimensional stabilitygood processabilitytoughnesshigh hardnesshigh rigidityhigh strengthand processability
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D-792 | 1.04 g/cm | |
| Mold shrinkage rate | ASTM D-955 | 0.50 % |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D-1238 | 1.2 g/10min | |
| Water absorption rate | ASTM D-570 | 0.30 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| IZOD notch impact strength | ASTM D-256 | 373 J/m | |
| Rockwell hardness | ASTM D-785 | 94 R-Scale | |
| Tensile modulus | ASTM D-638 | 1860 MPa | |
| tensile yield strength | ASTM D-638 | 35.3 MPa | |
| Flexural modulus | ASTM D-790 | 1860 MPa | |
| ASTM D-790 | 53.0 MPa | ||
| IZOD notch impact strength | ASTM D-256 | 147 J/m | |
| ASTM D-256 | 284 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| thermal conductivity | ASTM C-177 | 0.21 W/m.K | |
| Heat distortion temperature | ASTM D-648 | 89.0 ℃ | |
| Linear coefficient of thermal expansion | ASTM D-696 | 0.000095 cm/cm/℃ | |
| specific heat | ASTM C-351 | 1670 J/kg/℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top