SBS YH-792 SINOPEC BALING

Form：Granules | Grade：Injection grade

Properties:

Tougheningwear resistant

Typical Applications:

Household goodsadhesivesealantFootwearadhesivesealantShoe material

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Household goods \| adhesive \| sealant \| Footwear \| adhesive \| sealant \| Shoe material
Properties:	Toughening \| wear resistant

Certificates

No Data...

Technical Data Sheet

Other performance	Test Condition	Test Method	Test Result	Test Unit
Permanent compression deformation			优等品｜≤50	%
	Permanent compression deformation			一等品｜≤55	%
	Permanent compression deformation	Permanent compression deformation			合格品｜≤65	%
Volatile compounds			优等品｜≤0.50	%
	Volatile compounds			一等品｜≤0.70	%
	Volatile compounds	Volatile compounds			合格品｜≤1.00	%
ash content			优等品｜≤0.02	%
	ash content			一等品｜≤0.02	%
	ash content	ash content			合格品｜≤0.02	%
Block ratio			优等品｜40/60	S/B
	Block ratio			一等品｜40/60	S/B
	Block ratio	Block ratio			合格品｜40/60	S/B
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate			优等品｜3.01-5.00	g/10min
	melt mass-flow rate			一等品｜1.01-3.00	g/10min
	melt mass-flow rate	melt mass-flow rate			合格品｜0.10-1.00	g/10min
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Shore hardness			一等品｜90±5
Shore hardness	Shore hardness			合格品｜90±5
tear strength			优等品｜≥45.0	kN/m
	tear strength			一等品｜≥40.0	kN/m
	tear strength	tear strength			合格品｜≥35.0	kN/m
tensile strength			优等品｜≥22.0	Mpa
	tensile strength			一等品｜≥22.0	Mpa
	tensile strength	tensile strength			合格品｜≥18.0	Mpa
Tensile stress	300%伸长率		优等品｜≥3.4	Mpa
	Tensile stress	300%伸长率		一等品｜≥2.8	Mpa
	Tensile stress	Tensile stress	300%伸长率		合格品｜≥2.5	Mpa
Elongation at Break			优等品｜≥750	%
	Elongation at Break			一等品｜≥700	%
	Elongation at Break	Elongation at Break			合格品｜≥600	%
Shore hardness			优等品｜90±5

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top