PA66 LATAMID 66 H2 G/30
28
- Properties:Filler: Glass fiber reinf30% filler by weight
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ISO294-4 | 0.75to1.1 % | |
| ISO294-4 | 0.35to0.65 % | ||
| Water absorption rate | ISO62 | 0.27 % |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Dimensional Stability | 45.0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile strain | ISO527-2/5 | 3.2 % | |
| ISO527-2/5 | 4.0 % | ||
| ISO527-2/5 | 5.5 % | ||
| ISO527-2/5 | 6.0 % | ||
| ISO527-2/5 | 6.5 % | ||
| Tensile modulus | ISO527-2/1 | 9400 Mpa | |
| ISO527-2/1 | 8500 Mpa | ||
| ISO527-2/1 | 7400 Mpa | ||
| ISO527-2/1 | 5500 Mpa | ||
| ISO527-2/1 | 4400 Mpa | ||
| Tensile stress | ISO527-2/5 | 175 Mpa | |
| ISO527-2/5 | 135 Mpa | ||
| ISO527-2/5 | 110 Mpa | ||
| ISO527-2/5 | 100 Mpa | ||
| ISO527-2/5 | 85.0 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO179/1eU | 85 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ISO75-2/B | 260 °C | ||
| ISO75-2/A | 245 °C | ||
| Continuous use temperature 3 | 130 °C | ||
| vicat | ISO306/B50 | 255 °C | |
| ISO11359-2 | 8E-06 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top