
PPA A-1133 HS SOLVAY FRANCE
155
Form:Granules | Grade:Injection grade
Properties:
Chemical resistancestabilityLow moisture absorptionFiller: Glass fiber reinfFiller by weightFiller by weight
Typical Applications:
light-emitting diodeShellVehicle electronicsPhoneIndustrial componentsAutomotive interior partsIndustrial applicationsMetal substitutionFuel pipelineMachine/mechanical componentsApplication in the automotive fieldPower/Other ToolsLaptop caseParts under the hood of a car
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | light-emitting diode | Shell | Vehicle electronics | Phone | Industrial components | Automotive interior parts | Industrial applications | Metal substitution | Fuel pipeline | Machine/mechanical components | Application in the automotive field | Power/Other Tools | Laptop case | Parts under the hood of a car |
| Properties: | Chemical resistance | stability | Low moisture absorption | Filler: Glass fiber reinf | Filler by weight | Filler by weight |
Certificates
No Data...
Technical Data Sheet
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 49 | kJ/m² |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 8.8 | kJ/m² |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 73 | kJ/m² |
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 9.5 | kJ/m² |
| Bending modulus | 23°C | ISO 178 | 11600 | Mpa |
| bending strength | 23°C | ISO 178 | 319 | Mpa |
| Tensile modulus | 23°C | ISO 527-2 | 13400 | Mpa |
| Elongation at Break | 23°C | ISO 527-2 | 2.5 | % |
| tensile strength | 23°C | ISO 527-2 | 233 | Mpa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Vicat softening temperature | Melting Temperature | ISO 11357-3 | 313 | °C |
| Hot deformation temperature | 1.80MPaAnnealed | ISO 75-2/Af | 280 | °C |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ISO 1183 | 1.48 | g/cm³ | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dielectric strength | 3.20mm | IEC 60243-1 | 39 | KV/mm |
| Volume resistivity | IEC 60093 | 1E+15 | Ω.cm | |
| flame retardant performance | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | UL -94 | HB | 0.84mm | |
| UL -94 | HB | 3.0mm | ||
| UL -94 | HB | 1.5mm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.