Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO1183 | 0.936 g/cm³ |
| melt mass-flow rate | | ISO1133 | 0.70 g/10min |
| melt mass-flow rate | | ISO1133 | 3.0 g/10min |
| EnvironmentalStress-CrackingResistance | | IEC60811-4-1/B | >5000 hr |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | ISO868 | 54 |
| | DIN53505 | 53 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Pressure Test | | IEC60811-3-1 | <10 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile stress | Yield | ISO527-2/50 | 32.0 MPa |
| Tensile strain | Break | ISO527-2/50 | 800 % |
| Flexural modulus | | ASTMD790 | 600 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | IEC60093 | 1E+16 ohms·cm |
| dielectric strength | | IEC60243-1 | 20 kV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| brittle temperature | | ASTMD746 | <-76.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare