PA6 BKV25F30 LANXESS GERMANY

Form：Granules | Grade：Injection grade

Properties:

Heat aging

Typical Applications:

Automotive componentsInstrument componentsElectronic and Electrical ApplicationsIndustrial applicationsCommunication equipment

Supplier(1)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	Automotive components \| Instrument components \| Electronic and Electrical Applications \| Industrial applications \| Communication equipment
Properties:	Heat aging

Certificates

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Suspended wall beam without notch impact strength	-30°C	ISO 180/1U	45	kJ/m²
Suspended wall beam without notch impact strength	Suspended wall beam without notch impact strength	23°C	ISO 180/1U	50	kJ/m²
Multi axis Instrumented Impact Energy	-30°C	ISO 6603-2	1.90	J
Multi axis Instrumented Impact Energy	Multi axis Instrumented Impact Energy	23°C	ISO 6603-2	3.00	J
Multi axis Instrumented Peak Impact Force	-30°C	ISO 6603-2	900	N
Multi axis Instrumented Peak Impact Force	Multi axis Instrumented Peak Impact Force	23°C	ISO 6603-2	1000	N
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	45	kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	55	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
Burning wire flammability index	0.40mm	IEC 60695-2-12	960	°C
	Burning wire flammability index	0.8mm	IEC 60695-2-12	960	°C
		Burning wire flammability index	1.5mm	IEC 60695-2-12	960	°C
		Burning wire flammability index	Burning wire flammability index	3.0mm	IEC 60695-2-12	960	°C
Hot filament ignition temperature	0.40mm	IEC 60695-2-13	850	°C
	Hot filament ignition temperature	0.8mm	IEC 60695-2-13	775	°C
		Hot filament ignition temperature	1.5mm	IEC 60695-2-13	775	°C
		Hot filament ignition temperature	Hot filament ignition temperature	3.0mm	IEC 60695-2-13	850	°C
BurningBehavior		ISO 3795	passed
UL flame retardant rating	0.40mm	UL 94	V-0
	UL flame retardant rating	1.0mm	UL 94	V-0
	UL flame retardant rating	UL flame retardant rating	3.0mm	UL 94	V-0
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus	23°C	ISO 527-2/1	11000	Mpa
tensile strength	Break,23°C	ISO 527-2/5	150	Mpa
Tensile strain	Break,23°C	ISO 527-2/5	2.3	%
Bending modulus	23°C	ISO 178/A	10000	Mpa
bending strength	23°C	ISO 178/A	230	Mpa
Bending strain	23°C	ISO 178/A	2.5	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	215	°C
Hot deformation temperature	Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	205	°C
Vicat softening temperature		ISO 306/B120	205	°C
Melting temperature		ISO 11357-3	222	°C
Linear coefficient of thermal expansion	MD：23to55°C	ISO 11359-2	2E-05	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD：23to55°C	ISO 11359-2	9E-05	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	TD:280°C,2.00mm2	ISO 2577	0.60	%
	Shrinkage rate	TD:120°C,4hr,2.00mm3	ISO 2577	0.10	%
		Shrinkage rate	MD:280°C,2.00mm2	ISO 2577	0.30	%
		Shrinkage rate	Shrinkage rate	MD:120°C,4hr,2.00mm3	ISO 2577	0.10	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		IEC 60093	4.1E+13	ohms
Volume resistivity	23°C	IEC 60093	3.4E+14	ohms·cm
Compared to the anti leakage trace index	SolutionA	IEC 60112	PLC 1
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
ISO Shortcut		ISO 1874	PA6.GFHR.14-110.GF25

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top