
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | currency |
Certificates
No Data...
Technical Data Sheet
| other | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| characteristic | 耐磨性能良好 | |||
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | UL 94 | HB | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| bending strength | ASTM D790/ISO 178 | 11700 | kg/cm²(MPa)[Lb/in²] | |
| Bending modulus | ASTM D790/ISO 178 | 355000 | kg/cm²(MPa)[Lb/in²] | |
| bending strength | ISO 178 | 81.0 | Mpa | |
| Bending modulus | ISO 178 | 2450 | Mpa | |
| Tensile strain | Break | ISO 527-2 | 26 | % |
| Yield | ISO 527-2 | 10 | % | |
| tensile strength | ISO 527-2 | 60.0 | Mpa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | MD | ISO 11359-2 | 1.3E-04 | cm/cm/°C |
| Melting temperature | ISO 11357-3 | 165 | °C | |
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 95.0 | °C |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ASTM D792/ISO 1183 | 1.39 | ||
| Water absorption rate | Equilibrium,23°C,50%RH | ISO 62 | 0.20 | % |
| Shrinkage rate | MD:3.00mm | Internal Method | 2.0 | % |
| melt mass-flow rate | 190°C/2.16kg | ISO 1133 | 9.5 | g/10min |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Volume resistivity | IEC 60093 | 1E+14 | ohms·cm | |
| Surface resistivity | IEC 60093 | 1E+16 | ohms |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.