PP Copolymer BFI 256
0
- Usages:Thermoforming applicationsfilmsshieldscontainersshells
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTMD1505 | 0.902 g/cm³ | |
| melt mass-flow rate | ASTMD1238 | 2.0 g/10min |
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Haze ratio | ASTMD1003 | 14 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | Yield | ASTMD638 | 28.0 MPa |
| elongation | Yield | ASTMD638 | 13 % |
| Flexural modulus | ASTMD790A | 1000 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTMD256A | 270 J/m |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top