Technical Data Sheet
physical property | Test Condition | Test Method | Test Result |
---|
density | | DIN 53479 | 1.20 g/cm³ |
hardness | Test Condition | Test Method | Test Result |
---|
Shore hardness | | DIN 53505 | 67 |
Mechanical properties | Test Condition | Test Method | Test Result |
---|
Flexural modulus | | ISO 178 | 530 MPa |
Torsion Module | | DIN 53447 | 500 MPa |
Torsion Module | | DIN 53447 | 125 MPa |
Torsion Module | | | 4.00 |
Wear amount | | DIN 53516 | 40.0 mm³ |
tear strength | | DIN 53515 | 220 MPa |
Impact resistance | Test Condition | Test Method | Test Result |
---|
Suspended wall beam without notch impact strength | | ASTM D256 | 3.50 kJ/m² |
elastomer | Test Condition | Test Method | Test Result |
---|
tensile strength | | DIN 53504 | 26.2 MPa |
tensile strength | | DIN 53504 | 28.2 MPa |
tensile strength | | DIN 53504 | 50.5 MPa |
tensile strength | Break | DIN 53504 | 71.2 MPa |
elongation | Break | DIN 53504 | 380 % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.