TPU-Ester

TPU-Ester 890 AN BASF GERMANY

Compare

Technical Data Sheet

elastomer	Test Condition	Test Method	Test Result
tear strength		ASTM D624	144 kN/m
elongation	Break	ASTM D412	480 %
tensile strength		ASTM D412	39.3 MPa
	tensile strength	300%Strain	ASTM D412	31.0 MPa
	tensile strength	tensile strength	100%Strain	ASTM D412	13.8 MPa
Permanent compression deformation	70°C,22hr	ASTM D395B	45 %
Permanent compression deformation	Permanent compression deformation	23°C,22hr	ASTM D395B	20 %

mechanical properties	Test Condition	Test Method	Test Result
Wear resistance		DIN 53516	25 mm³
Taber abraser		ASTM D1044	45.0 mg
Bending modulus	Injection	ASTM D790	66.9 MPa
Tensile modulus	Injection	ASTM D412	29.0 MPa

thermal performance	Test Condition	Test Method	Test Result
Vicat softening temperature		Internal Method	81 °C
Vicat softening temperature	Vicat softening temperature		ASTM D1525	120 °C
Glass transition temperature		Internal Method	-14.0 °C

Physical properties	Test Condition	Test Method	Test Result
melt mass-flow rate	190°C/8.7kg	ASTM D1238	15to30 g/10min
density		ASTM D792	1.22 g/cm³

hardness	Test Condition	Test Method	Test Result
Shore hardness	ShoreA	ASTM D2240	92

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top