PC+ABS PC-ABSCOM™ B200

Usages:
Automotive internal parts
medical equipment casings
Compare

Technical Data Sheet

physical property	Test Method	Test Result
Water absorption rate	ISO62	0.22 %
Shrinkage rate	ISO294-4	0.40到0.70 %
Water absorption rate	ISO62	0.70 %
density	ISO1183	1.15 g/cm³
melt mass-flow rate	ISO1133	15 g/10min

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating		UL94	HB
UL flame retardant rating	UL flame retardant rating		UL94	HB

Mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ISO527-2/1	2100 MPa
Tensile stress	Yield	ISO527-2/50	50.0 MPa
Flexural modulus		ISO178	2200 MPa
Bending stress		ISO178	66.0 MPa
Tensile stress		ISO527-2	63.0 MPa
Tensile stress	Tensile stress		ISO527-2	20.0 MPa
Tensile strain	Yield	ISO527-2/50	4.3 %
	Tensile strain		ISO527-2	6.3 %
	Tensile strain	Tensile strain	Break	ISO527-2	35 %

Impact resistance	Test Method	Test Result
Charpy Notched Impact Strength	ISO179/1eA	44 kJ/m²
Impact strength of simply supported beam without notch	ISO179/1eU	无断裂
Impact strength of cantilever beam gap	ISO180/1A	45 kJ/m²

Thermal performance	Test Method	Test Result
	ISO75-2/B	121 °C
		ISO75-2/Ae	100 °C
vicat	ISO306/B50	120 °C
	ISO11359-2	9.5E-04 cm/cm/°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top