Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Melt volume flow rate | | ISO1133 | 15.0 cm3/10min |
| Shrinkage rate | | 内部方法 | 0.50to0.70 % |
| Shrinkage rate | | 内部方法 | 0.50to0.70 % |
| Water absorption rate | | ISO62 | 0.20 % |
| optical performance | Test Condition | Test Method | Test Result |
|---|
| refractive index | | ASTMD542 | 1.585 |
| transmissivity | | ASTMD1003 | 88.0 % |
| transmittance | | ASTM D1003/ISO 13468 | 88 % |
| refractive index | | ASTM D542/ISO 489 | 1.585 |
| other | Test Condition | Test Method | Test Result |
|---|
| | | 低粘度 抗紫外线性能良好 |
| purpose | | | 电子电器领域应用 透明或半透明配件 电器用具 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-2 |
| UL flame retardant rating | | UL94 | V-2 |
| UL flame retardant rating | | UL94 | V-2 |
| Burning wire flammability index | | IEC60695-2-12 | 850 °C |
| Burning wire flammability index | | IEC60695-2-12 | 960 °C |
| Hot filament ignition temperature | | IEC60695-2-13 | 850 °C |
| Hot filament ignition temperature | | IEC60695-2-13 | 875 °C |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Nominal tensile fracture strain | | ISO527-2/50 | >50 % |
| Bending modulus 2 | | ISO178 | 2400 Mpa |
| Bending stress 2 | | ISO178 | 94.0 Mpa |
| Tensile modulus | | ISO527-2/1 | 2400 Mpa |
| Tensile stress | | ISO527-2/50 | 61.0 Mpa |
| Tensile strain | | ISO527-2/50 | 6.0 % |
| elongation at break | | ASTM D638/ISO 527 | 50 % |
| Tensile modulus | | ASTM D638/ISO 527 | 2130 kg/cm²(MPa)[Lb/in²] |
| Rockwell hardness | | ASTM D785 | M 77 |
| Flexural modulus | | ASTM D790/ISO 178 | 2260 kg/cm²(MPa)[Lb/in²] |
| bending strength | | ASTM D790/ISO 178 | 94 kg/cm²(MPa)[Lb/in²] |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of simply supported beam without notch | | ISO179 | NoBreak |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | IEC60093 | >1.0E+15 ohms |
| Volume resistivity | | IEC60093 | >1.0E+15 ohms·cm |
| Dielectric strength 3 | | IEC60243-1 | 30 KV/mm |
| dielectric constant | | IEC60250 | 3.10 |
| dielectric constant | | IEC60250 | 3.00 |
| Dissipation Factor | | IEC60250 | 1E-03 |
| Dissipation Factor | | IEC60250 | 9E-03 |
| CTI | | IEC60112 | 225 V |
| Physical properties | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792/ISO 1183 | 1.2 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO75-2/B | 141 °C |
| | ISO75-2/A | 125 °C |
| vicat | | ISO306/B50 | 146 °C |
| | ISO11359-2 | 7E-05 cm/cm/°C |
| | ISO11359-2 | 7E-05 cm/cm/°C |
| RTI Elec | | UL746 | 125 °C |
| RTI Imp | | UL746 | 115 °C |
| RTI Str | | UL746 | 125 °C |
| Combustibility (rate) | | UL94 | V-2 |
| vicat | | ASTM D1525/ISO R306 | 148 ℃（℉） |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices