PC 18F22110 FR3
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.25 g/cm3 | |
| Water absorption rate | ISO 62 | 0.13 % | |
| Shrinkage rate | ISO 2557 | 0.30-0.50 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile stress | ISO 527-2 | 80.0 MPa | |
| Tensile strain | ISO 527-2 | 6.0 % | |
| Tensile modulus | ISO 527-2 | 3600 MPa | |
| Impact strength of cantilever beam gap | ISO 180/1A | 6.00 KJ/m2 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Hot filament ignition temperature | IEC 60695-2-13 | 850 ℃ | |
| Heat distortion temperature | ISO 75-2/B | 144 ℃ | |
| ISO 75-2/A | 139 ℃ | ||
| vicat | ISO 306/B | 147 ℃ | |
| UL flame retardant rating | UL 94 | V-2 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top