PA66 A 205F SOLVAY FRANCE

Form：Granules | Grade：Injection grade

Typical Applications:

Thin walled componentsFastenersLaptop case

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:

Thin walled components | Fasteners | Laptop case

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	23°C	ISO 180	5.0	kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23°C	ASTM D256	80	J/m
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	NoBreak
Charpy Notched Impact Strength	23°C	ISO 179/1eA	5.0	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	0.40mm	UL 94	V-2
	UL flame retardant rating	0.8mm	UL 94	V-2
		UL flame retardant rating	1.6mm	UL 94	V-2
		UL flame retardant rating	UL flame retardant rating	3.2mm	UL 94	V-2
Burning wire flammability index	1.6mm	IEC 60695-2-12	850	°C
Extreme Oxygen Index		ISO 4589-2	29	%
UL flame retardant rating		NFF16-101	F2
smoke density		NFF16-101	I3
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
bending strength	23°C	ISO 178	120	Mpa
bending strength	bending strength	23°C	ASTM D790	125	Mpa
Bending modulus	23°C	ISO 178	3000	Mpa
Bending modulus	Bending modulus	23°C	ASTM D790	3350	Mpa
Tensile strain	Break,23°C	ISO 527-2	50	%
elongation	Break,23°C	ASTM D638	25	%
Tensile strain	Yield,23°C	ISO 527-2	4.0	%
tensile strength	Break,23°C	ISO 527-2/1A	60.0	Mpa
	tensile strength	Yield,23°C	ISO 527-2/1A	85.0	Mpa
	tensile strength	tensile strength	Yield,23°C	ASTM D638	85.0	Mpa
Tensile modulus	23°C	ISO 527-2/1A	3200	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Melting temperature		ISO 11357-3	263	°C
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/Af	65.0	°C
	Hot deformation temperature	1.8MPa,Unannealed	ASTM D648	80.0	°C
	Hot deformation temperature	Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/Bf	205	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	23°C,24hr	ISO 62	1.2	%
density		ISO 1183/A	1.14	g/cm³
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Relative permittivity		IEC 60250	2.90
Dielectric strength	2.00mm	IEC 60243-1	27	KV/mm
Volume resistivity		IEC 60093	1E+15	ohms·cm
Surface resistivity		IEC 60093	5E+15	ohms
Dissipation factor		IEC 60250	0.030
Compared to the anti leakage trace index	SolutionA	IEC 60112	PLC 0
Compared to the anti leakage trace index	Compared to the anti leakage trace index	SolutionB	IEC 60112	PLC 1
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
EuropeanRailwaysCertifications	R22	EN45545-2	HL2
EuropeanRailwaysCertifications	EuropeanRailwaysCertifications	R23	EN45545-2	HL2

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top