
PBT 1210G6 NAN YA TAIWAN
213
Form:Granules | Grade:Enhanced level
Properties:
Glass fiber reinforcedhigh strengthheat-resistingElectrical performance
Typical Applications:
Electrical fieldElectronic fieldAutomotive sector
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Electrical field | Electronic field | Automotive sector |
| Properties: | Glass fiber reinforced | high strength | heat-resisting | Electrical performance |
Certificates
No Data...
Technical Data Sheet
| other | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Shrinkage rate | ASTM D955 | 0.3-1.0 | % | |
| density | ASTM D792 | 1.52 | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| tensile strength | ASTM D638 | 1300 | kg/cm2 | |
| Bending modulus | ASTM D790 | 75000 | kg/cm2 | |
| Impact strength of cantilever beam gap | ASTM D256 | 9.0 | kg.cm/cm | |
| ASTM D256/ISO 179 | 907 | kg·cm/cm(J/M)ft·lb/in | ||
| Tensile modulus | ASTM D638/ISO 527 | 75000 | kg/cm²(MPa)[Lb/in²] | |
| tensile strength | ASTM D638/ISO 527 | 1350 | kg/cm²(MPa)[Lb/in²] | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | HDT | ASTM D648 | 210 | °C |
| HDT | ASTM D648/ISO 75 | 215 | ℃(℉) | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ASTM D792/ISO 1183 | 1052 | ||
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dielectric strength | ASTM D149 | 23 | KV/mm | |
| Arc resistance | ASTM D495 | 130 | Sec. | |
| ASTM D495/IEC 60112 | 130 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.