Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Density | | ISO 1183 | 1.22 g/cm³ |
| Shrinkage rate | | ISO 294-4 | 0.8 % |
| Shrinkage rate | | ISO 294-4 | 0.1 % |
| Water absorption rate | | ISO 62 | 1.1 % |
| Water absorption rate | | ISO 62 | 0.6 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO 527-2 | 6500 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of simply supported beam without notch | | ISO 179/1eU | 90 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO 179/1eU | 90 kJ/m² |
| Flame retardant performance | Test Condition | Test Method | Test Result |
|---|
| Flammability level Flammability level | | IEC 60695-11-10, -20 | HB |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistance | | IEC 60093 | -- ohms |
| Volume Resistance | | IEC 60093 | -- ohms·cm |
| Dielectric Strength Electric Strength | | IEC 60243-1 | -- KV/mm |
| | IEC 60112 | -- V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Hot deformation temperature | | ISO 75-2/A | 160 °C |
| Hot deformation temperature | | ISO 75-2/C | 90 °C |
| melting temperature | | ISO 11357-3 | 178 °C |
| | ISO 11359-2 | 0.000020 1/℃ |
| | ISO 11359-2 | 0.00015 1/℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices