PA66 A3 WR GF30 NILIT SUZHOU

Form：Granules

Properties:

enhanceThermal stability

Typical Applications:

Industrial applicationsAutomotive sector

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Industrial applications \| Automotive sector
Properties:	enhance \| Thermal stability

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	42	kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	55	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	0.8mm	UL 94	HB
	UL flame retardant rating	1.6mm	UL 94	HB
	UL flame retardant rating	UL flame retardant rating	3.2mm	UL 94	HB
Burning wire flammability index	0.8mm	IEC 60695-2-12	650	°C
Burning wire flammability index	Burning wire flammability index	3.2mm	IEC 60695-2-12	650	°C
Extreme Oxygen Index		ISO 4589-2	24	%
flammability		FMVSS302	B30
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus	23°C	ISO 527-2	9800	Mpa
tensile strength	Yield,23°C	ISO 527-2	185	Mpa
Tensile strain	Break,23°C	ISO 527-2	2.5	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	260	°C
Hot deformation temperature	Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	250	°C
Continuous use temperature		IEC 60216	130	°C
Ball Pressure Test	125°C	IEC 60695-10-2	通过
Ball Pressure Test	Ball Pressure Test	165°C	IEC 60695-10-2	通过
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	TD:23°C	ISO 294-4	0.75	%
Shrinkage rate	Shrinkage rate	MD:23°C	ISO 294-4	0.40	%
Water absorption rate	23°C,24hr	ISO 62	1.0	%
Water absorption rate	Water absorption rate	Saturation,23°C	ISO 62	5.5	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		IEC 60093	1E+13	ohms
Volume resistivity	23°C	IEC 60093	1E+15	ohms·cm
Dielectric strength	2.00mm	IEC 60243-1	21	KV/mm
Compared to the anti leakage trace index	3.20mm,SolutionA	IEC 60112	PLC 1

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top