PC S-1000R MITSUBISHI THAILAND

Form：Granules | Grade：Injection grade

Properties:

High transparency

Typical Applications:

Bottle capCastersOptical applicationsHome appliance componentsAutomotive Applications

Supplier(1)

Product Description

Certificates(2)

Datasheet

Product Description

Typical Applications:	Bottle cap \| Casters \| Optical applications \| Home appliance components \| Automotive Applications
Properties:	High transparency

Certificates

TDS

Technical Data Sheet

Other performance	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.60mm	UL 94	V-2
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D-792	1.20	g/cm³
Shrinkage rate	MD,3.00mm	ASTM D-955	0.6	%
melt mass-flow rate	300℃/1.2kg	ASTM D-1238	8.5	g/10min
Water absorption rate	24hr	ASTM D-570	0.24	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	R	ASTM D-785	123
tensile strength	3.20mm	ASTM D-638	65	Mpa
elongation	Break,3.20mm	ASTM D-638	120	%
Bending modulus	3.20mm	ASTM D-790	2350	Mpa
bending strength	3.20mm	ASTM D-790	90.0	Mpa
Impact strength of cantilever beam gap	3.20mm	ASTM D-256	900	J/m
Dart impact	3.20mm	ASTM D-3029	> 85.0	J
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion	Flow	ASTM D-696	6.5E-05	cm/cm/℃
Hot deformation temperature	1.8MPa,Unannealed,6.4mm	ASTM D-648	138	°C
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		ASTM D-257	2.1E+16	ohm·cm
Dielectric constant		ASTM D-150	2.85

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top