PARA 5002/0085 SOLVAY BELGIUM

Form：Granules | Grade：Injection grade

Properties:

Creep resistancehigh strength

Typical Applications:

sporting goodsVehicle electronics

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	sporting goods \| Vehicle electronics
Properties:	Creep resistance \| high strength

Certificates

No Data...

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus	23℃	ISO 527	（10000干态）(23000湿态）	Mpa
tensile strength	23℃	ISO 527	（135干态）(190湿态）	Mpa
elongation	23℃	ISO 527	（2.2干态）(1.3湿态）	%
bending strength	23℃	ISO 178	（215干态）(270湿态）	Mpa
Bending modulus	23℃	ISO 178	（8000干态）(21000湿态）	Mpa
Impact strength of cantilever beam gap	23℃	ISO 180	（60干态）(50湿态）	kJ/m²
Suspended wall beam without notch impact strength		ISO 180	（370干态)(345湿态）	kJ/m²
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	Unannealed1.8MPa	ISO 75	220	°C
Melting temperature		ISO 11357	280	°C
Linear coefficient of thermal expansion	Flow	ISO 11359	0.0029	cm/cm/℃
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	1.51	g/cm³
Shrinkage rate	Flow	ISO 294	0.2	%
Shrinkage rate	Shrinkage rate	垂直	ISO 294	0.4	%
Water absorption rate	23°C 24hr	ISO 62	0.22	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		IEC 60093	1000000000000000	Ω.cm
Insulation per degree		IEC 60243	28	KV/mm
Dielectric constant	110Hz	IEC 60250	3.9
Dissipation factor	110Hz	IEC 60250	600	V
flame retardant performance	Test Condition	Test Method	Test Result	Test Unit
Extreme Oxygen Index		ISO 4589	23	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top