POE PL-1880G DOW THAILAND

Form：Granules | Grade：Enhanced level

Properties:

Aging resistanceLow temperature resistanc

Typical Applications:

Automotive Applicationshousehold electrical appliances

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Automotive Applications \| household electrical appliances
Properties:	Aging resistance \| Low temperature resistanc

Certificates

No Data...

Technical Data Sheet

optical performance	Test Condition	Test Method	Test Result	Test Unit
gloss	20°,50.8μm	ASTM D2457	141
transparency	50.8μm	ASTM D1746	83.0
turbidity	50.8μm	ASTM D1003	1.1	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Vicat softening temperature		ASTM D1525	86.0	°C
Melting temperature		Internal Method	99.0	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	190°C/2.16kg	ASTM D1238	1.0	g/10min
film	Test Condition	Test Method	Test Result	Test Unit
tensile strength	MD:Break,51μm	ASTM D882	58.6	Mpa
tensile strength	tensile strength	TD:Break,51μm	ASTM D882	44.7	Mpa
elongation	MD:Break,51μm	ASTM D882	620	%
elongation	elongation	TD:Break,51μm	ASTM D882	630	%
Dart impact	51μm	ASTM D1709B	>830	g
Elmendorf tear strength	MD:51μm	ASTM D1922	550	g
Elmendorf tear strength	Elmendorf tear strength	TD:51μm	ASTM D1922	720	g
Initial sealing temperature	51μm	Internal Method	85.0	°C
film thickness			51	µm
Thin film puncture strength	51μm	Internal Method	8.81	J
	Thin film puncture strength	51μm	Internal Method	92.5	N
	Thin film puncture strength	Thin film puncture strength	51μm	Internal Method	22.3	J/cm³
Secant modulus	2%Secant,MD:51μm	ASTM D882	91.7	Mpa
Secant modulus	Secant modulus	2%Secant,TD:51μm	ASTM D882	92.4	Mpa
tensile strength	MD:Yield,51μm	ASTM D882	7.24	Mpa
tensile strength	tensile strength	TD:Yield,51μm	ASTM D882	6.89	Mpa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top