PC S-3000VR MITSUBISHI THAILAND

149

Form：Granules | Grade：Injection grade

Properties:

Weather resistancetransparent

Typical Applications:

Automotive sectorElectrical appliancesElectronic fieldElectrical field

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Automotive sector \| Electrical appliances \| Electronic field \| Electrical field
Properties:	Weather resistance \| transparent

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength	23°C	ISO 179	67	kJ/m²
Impact strength of simply supported beam without notch	23°C	ISO 179	NoBreak
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile strain	Yield	ISO 527-2	6.7	%
Nominal tensile fracture strain		ISO 527-2	120	%
Bending modulus		ISO 178	2300	Mpa
bending strength		ISO 178	93.0	Mpa
Tensile modulus		ISO 527-2	2400	Mpa
tensile strength	Yield	ISO 527-2	62.0	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	139	°C
Hot deformation temperature	Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	124	°C
Linear coefficient of thermal expansion	MD	ISO 11359-2	6.5E-05	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD	ISO 11359-2	6.6E-05	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	1.20	g/cm³
melt mass-flow rate	300°C/1.2kg	ISO 1133	15	g/10min
Melt Volume Flow Rate (MVR)	300°C/1.2kg	ISO 1133	14.0	cm3/10min
Shrinkage rate	TD:3.20mm		0.50-0.70	%
Shrinkage rate	Shrinkage rate	MD:3.20mm		0.50-0.70	%
Water absorption rate	Saturation,23°C	ISO 62	0.24	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		IEC 60093	6E+15	ohms
Volume resistivity		IEC 60093	3E+16	ohms·cm
Dielectric strength	1.00mm	IEC 60243-1	31	KV/mm
Dielectric strength	Dielectric strength	3.00mm	IEC 60243-1	18	KV/mm
Relative permittivity	100Hz	IEC 60250	3.10
Relative permittivity	Relative permittivity	1MHz	IEC 60250	3.10
Dissipation factor	100Hz	IEC 60250	6E-04
Dissipation factor	Dissipation factor	1MHz	IEC 60250	9E-03
Compared to the anti leakage trace index	CTI	UL 746	PLC 2

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top