PP TechnoFiber PP LGF 40-10-01 H
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO1183 | 1.20 g/cm³ | |
| Shrinkage rate | ISO294-4 | 0.20 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO527-2/1 | 8900 MPa | |
| Tensile stress | Yield | ISO527-2/50 | 120 MPa |
| Tensile strain | Yield | ISO527-2/50 | 2.3 % |
| Flexural modulus | ISO178 | 9100 MPa | |
| Bending stress | ISO178 | 140 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO179/1eA | 19 kJ/m² | |
| ISO179/1eA | 20 kJ/m² | ||
| Impact strength of simply supported beam without notch | ISO179/1eU | 54 kJ/m² | |
| ISO179/1eU | 58 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ISO75-2/B | 160 °C | ||
| ISO75-2/A | 152 °C | ||
| ISO75-2/C | 128 °C | ||
| melting temperature | ISO11357-3 | 165 °C | |
| ISO11359-2 | 1.5E-05 cm/cm/°C | ||
| ISO11359-2 | 3.4E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top